Engineered Medium Duty Steel Shelving and industrial warehouse storage systems
High-density longspan medium duty shelving aisle in logistics distribution center
Modular steel shelving installation engineered to EN 15512 safety standards
HelvetiaRack

Medium Duty Steel Shelving Solutions

EN 15512 Structural Engineering · SIA 261 Seismic Compliance · 200–800 kg UDL/Level.

Modular Longspan & Multi-Tier Systems

Optimized for manual picking, e-commerce & industrial parts.

Direct Manufacturing & Global Delivery

Custom pitch, powder-coated or galvanized finish, certified durability.

Engineering Insights

The Strategic Procurement Guide to Medium Duty Steel Shelving Systems

An in-depth structural analysis of load-bearing geometry, material selection, EN 15512 safety factors, and total cost of ownership (TCO) for global supply chain procurement managers.

Navigating Modern Storage Intent: Why Medium Duty Steel Shelving is the Industrial Benchmark

In modern warehouse operations, logistics planning frequently faces a structural operational dilemma: traditional heavy-duty pallet racking is oversized and cost-inefficient for non-palletized hand-picked inventory, whereas standard light-duty commercial shelving lacks the structural rigidity and safety factors required for industrial loads between 200 kg and 800 kg per shelf level.

Medium Duty Steel Shelving bridges this architectural gap. Engineered using cold-rolled high-tensile steel (Q235B / Q355B structural grades), these systems provide modular longspan capabilities, customizable beam profiles, and boltless step-beam connections designed for rapid assembly and reconfiguration. Whether storing unboxed automotive parts, industrial hardware, pharmaceutical totes, or high-velocity e-commerce SKUs, medium-duty shelving maximizes vertical cubic space while maintaining strict adherence to European safety norms (EN 15512, EN 15620, EN 15635) and Swiss seismic regulations (SIA 261).

System Parameter Standard Specification Heavy-Duty Option Engineering Standard
Load Capacity (UDL) 200 kg – 500 kg / level 500 kg – 800 kg / level EN 15512 / FEM 10.2.06
Upright Profile 55×47×1.5 mm / 60×50×1.8 mm 80×60×2.0 mm cold-formed steel ISO 6892-1 Tensile Tested
Beam Cross-Section Step beam 50×30 mm / P-type beam Step beam 60×40 mm / 80×50 mm EN 10346 Cold-Rolled Steel
Pitch Adjustment 50 mm modular hole pattern 50 mm / 75 mm dual-slot pattern Boltless Clip Connection
Decking Material Options Powder-coated steel panels (0.7-1.0mm) Wire mesh deck / 25mm Particle board EN 13986 / ISO 9227 Salt Spray
Seismic Standard Zone Z1a / Z2 (SIA 261 compliant) Zone Z3a / Z3b high-seismic bracing SIA 261 / Eurocode 8 / FEM 10.2.08
Product Catalog

High-Performance Medium Duty Steel Shelving Configurations

Select from our precision-engineered shelf configurations tailored for warehouse distribution, cold storage, multi-tier platforms, and automated picking environments.

Modular Longspan Medium Duty Steel Shelving Unit

Modular Longspan Medium Duty Steel Shelving

Industrial boltless design featuring adjustable 50mm pitch beams, heavy-duty drop-in steel decking, and a maximum uniformly distributed load (UDL) of up to 500 kg per level.

Medium Duty Shelving
Multi-Tier Medium Duty Steel Shelving Mezzanine Platform

Multi-Tier Shelving Structure & Mezzanines

Vertical multi-level storage racking utilizing medium-duty frames as supporting columns. Multiplies floor space efficiency with integrated steel mesh walkways, stairs, and handrails.

Multi-Tier Shelving
Galvanized Cold Store Medium Duty Steel Shelving

Galvanized Cold Store Medium Duty Shelving

Pre-galvanized or hot-dip galvanized steel shelving designed to withstand sub-zero cold room environments down to −30 °C without paint chipping or structural embrittlement.

Galvanized Shelving
AMR-Compatible Medium Duty Steel Shelving Module

AMR-Compatible Pick Modules & Tote Shelving

High-precision medium duty steel shelving tailored for automated mobile robot (AMR) navigation, barcode indexing, Pick-to-Light integration, and high-velocity bin retrieval.

Automated Shelving
Heavy Step Beam Medium Duty Shelving System

Heavy Step-Beam Wire Mesh Deck Shelving

Heavy-duty longspan shelf bays incorporating heavy steel wire mesh decking for optimized overhead sprinkler water penetration, ventilation, and dust prevention.

Step Beam Shelving
Carton Flow Medium Duty Steel Shelving Rack

Carton Flow Medium Duty Steel Shelving

Integrated roller track shelving designed for First-In, First-Out (FIFO) manual order picking, reducing walk times by up to 40% in high-turnover fulfillment warehouses.

Carton Flow Shelving
High-Bay Miniload Medium Duty Steel Shelving Structure

High-Bay Miniload Medium Duty Shelving

Ultra-tolerant steel shelving frame structures designed to support high-speed stacker crane operations and micro-load automated retrieval systems up to 12 meters height.

Miniload Shelving
Mobile Track Mounted Medium Duty Steel Shelving

Mobile Track-Mounted Medium Duty Shelving

High-density shelving units mounted on floor rails to eliminate fixed aisles, doubling archive and spare-parts storage density within compact footprints.

Mobile Shelving
Enterprise Excellence

Helvetia Rack Systems AG – Engineering Precision & Certified Quality

We combine automated cold-roll steel manufacturing with rigorous structural engineering to deliver reliable Medium Duty Steel Shelving systems globally.

Our engineering team calculates every shelving bay based on your specific operational metrics: load distribution, deflection limits (L/200 standard), seismic zone coefficients, and material handling workflows. We ensure you invest in an engineered structural system built for decade-long operational safety.

  • Structural static design calculated to EN 15512 and FEM 10.2.06 standards
  • Seismic load calculation according to SIA 261 (Zones Z1a to Z3b) and Eurocode 8
  • In-house continuous roll-forming lines, automated robotic welding, and thermosetting powder coating
  • Turnkey project management: CAD floor layout, structural calculation, supply, and installation
  • Multilingual engineering team serving clients in English, German, French, and Italian
800 kgMaximum Uniformly Distributed Load (UDL) per shelf level
Q235B / Q355BHigh-yield structural steel grade for cold-formed profiles
EN 15512European static testing and structural compliance standard
SIA 261Swiss structural safety standard for seismic zone design
50 mmAdjustable beam pitch for complete vertical storage flexibility
100%Traceable steel mill test certificates (MTC) per ISO 9001
Proven Implementations

Global Medium Duty Steel Shelving Projects

Explore verified installations delivering high-density inventory control for automotive, retail, pharmaceutical, and logistics hubs.

Multi-Tier Medium Duty Steel Shelving installation in automotive logistics center
Multi-Tier Shelving

Automotive Parts Hub

Location
Zurich, Switzerland
Capacity
450 kg / Level
Footprint
3,200 sq.m
Standard
SIA 261 / EN 15512
Longspan Medium Duty Steel Shelving project in pharmaceutical distribution warehouse
Pharma Longspan

Pharma Pick Center

Location
Basel, Switzerland
Capacity
350 kg / Level
Decking
Steel Panels
Finish
Antimicrobial Powder
Galvanized Medium Duty Steel Shelving installed in cold storage room
Cold Storage

Sub-Zero Food Logistics

Location
Rotterdam, Netherlands
Temperature
−25 °C
Capacity
500 kg / Level
Finish
Hot-Dip Galvanized
E-Commerce Fulfillment Center with high-density medium duty steel shelving
E-Commerce

High-Velocity Fulfillment

Location
Frankfurt, Germany
Bays
1,800 Shelf Bays
Integration
AMR & Pick-to-Light
Pitch
50 mm Adjustable
Enterprise Trust

Trusted by Global Logistics & Manufacturing Leaders

Our medium duty steel shelving systems support operations across global supply chain networks.

Client logo – industrial customer
Client logo – global enterprise
Client logo – logistics operator
Client logo – retail supply chain
Client logo – automotive group
YKK
KFC
DHL
Client logo – distribution brand
Client logo – food service brand
Engineering Resources

Medium Duty Steel Shelving Technical Knowledge Center

Practical insights on safety standards, shelf deck selection, and optimization strategies for warehouse engineering teams.

Engineering team conducting load deflection testing on steel shelving
Technical Paper

EN 15512 Safety Factors for Medium Duty Steel Shelving

Understanding beam deflection safety limits (L/200), upright column buckling strength, and how factor of safety calculations safeguard operational warehouse personnel under peak loading conditions.

  • Steel Decking vs. Wire Mesh vs. Particle Board

    Comparative structural review evaluating fire sprinkler water drainage, impact durability, point load limits, and hygienic maintenance across shelf decking materials.

  • SIA 261 Seismic Design for Multi-Tier Shelving Structures

    How structural engineers calculate horizontal acceleration forces, top-floor sway mitigation, and floor anchor embedment for multi-level shelving platforms.

  • Calculating Total Cost of Ownership (TCO) in Shelving Systems

    Why initial steel weight and beam profile geometry directly impact long-term maintenance costs, reconfiguration speed, and modular facility expansion options.

  • EN 15635 Annual Shelving Inspection Protocol

    Essential checklist for identifying beam permanent deformation, upright column dent tolerances, and safety clip engagement during mandatory annual inspections.

Procurement FAQ

Medium Duty Steel Shelving FAQs Answered by Engineers

Key technical queries addressed to support your inventory storage planning and bid evaluation process.

What load capacity range defines Medium Duty Steel Shelving?

Medium Duty Steel Shelving is engineered for uniformly distributed loads (UDL) ranging from 200 kg to 800 kg per shelf level. It bridges the gap between light-duty hand-pick racking (under 200 kg) and heavy-duty selective pallet racking (over 1,000 kg), making it ideal for non-palletized inventory, heavy cartons, hardware, and automotive components.

Which structural design standards govern your Medium Duty Steel Shelving?

Our medium duty steel shelving systems are designed and tested in strict accordance with EN 15512 (Steel static storage systems structural design principles) and FEM 10.2.06. Installation and floor levelling tolerances follow EN 15620, while seismic structural integrity is calculated according to Swiss SIA 261 and Eurocode 8 guidelines.

What shelf decking options are available for industrial applications?

We offer three primary shelf decking materials: (1) Cold-rolled steel panels with epoxy powder-coat or galvanized finish for smooth surfaces; (2) Heavy-duty wire mesh decking which allows light penetration, ventilation, and overhead fire sprinkler water flow; and (3) High-density particle board supported by galvanized steel cross-bars for cost-effective industrial hand-picking.

Can medium duty steel shelving be integrated into automated picking workflows?

Yes. Helvetia Rack Systems AG designs custom AMR-compatible and automated bin picking shelving configurations. These units incorporate tight manufacturing tolerances, robotic target location plates, integrated Pick-to-Light LED tracks, and specialized divider systems to maximize automated order fulfillment efficiency.

How does Helvetia Rack Systems AG support multi-tier shelving installations?

We engineer multi-tier shelving mezzanine structures that utilize high ceiling clearances to create 2-floor or 3-floor manual picking platforms. By using heavy-duty shelving uprights as load-bearing structural columns, we integrate steel mesh walkways, staircases, pallet drop gates, and perimeter handrails, doubling or tripling storage capacity on the same footprint.

What is the standard lead time and custom size availability for enterprise orders?

Standard bay dimensions (e.g., depths of 400–1000 mm, spans of 1200–2500 mm, heights up to 6000 mm) are produced with rapid turnarounds. Custom profiles, specific RAL color powder coatings, and specialized pitch geometry can be engineered and manufactured within 3 to 4 weeks, with full container dispatch and worldwide shipping coordination provided by our logistics division.