Engineered for immediate 100% pallet access, structural rigidity, and Swiss safety standard compliance. Designed for distribution centers across Canton Zurich, Dietikon, Winterthur, and Kloten.
Single deep selective pallet racking remains the cornerstone of modern logistics engineering across the Greater Zurich area. Operating under high operational velocity, industrial zones such as Dietikon, Winterthur, and the Kloten Airport logistics precinct require storage systems that combine maximum structural safety with uncompromised operational flexibility. As a direct factory exporter and manufacturing partner, our structural engineering team builds systems that strictly adhere to European standard EN 15512:2020 (Steel static storage systems - Adjustable pallet racking systems - Principles for structural design) and Swiss building safety norms.
The mechanical topology of a single deep selective rack relies on single-row or back-to-back double-row configurations where every individual pallet bay is directly accessible by standard reach trucks, counterbalanced forklifts, or VNA (Very Narrow Aisle) equipment. Unlike high-density push-back or drive-in racking systems, single deep designs eliminate load blockages, making them optimal for operations handling high SKU variability, rapid order picking, and tight inventory audit cycles typical of Swiss pharmaceutical, medtech, and luxury goods manufacturing.
Under EN 15512, maximum vertical beam deflection under full operational load is strictly limited to L/200 (where L is the clear beam span). For a standard 2700mm beam carrying two 1000kg EUR-pallets (EPAL 1), the maximum allowable deflection at center-span is capped at 13.5mm. Furthermore, frame load-bearing capacity factors in second-order sway effects ($P-\Delta$ and $P-\delta$ analysis) ensuring dynamic stability under asymmetry, floor settlement, and forklift impact forces.
Structural steel specification is critical for long-term reliability. Our upright profiles are cold-formed from certified high-tensile steel grades Q235B and Q355B (equivalent to European S235JR and S355JR under EN 10025). Upright frames feature continuous teardrop or diamond punch patterns at 50mm or 75mm pitch increments, allowing precise beam height adjustment to minimize unused vertical building volume without compromising vertical column stability.
| Storage System Type | Pallet Selectivity | Floor Footprint Utilization | Forklift Compatibility | Ideal Zurich Industry Application |
|---|---|---|---|---|
| Single Deep Selective Racking | 100% Immediate Access | 35% - 45% Floor Usage | Standard Reach, Counterbalance, VNA | Pharma, High-Tech, Retail, 3PL Distribution |
| Double Deep Pallet Racking | 50% Immediate Access | 55% - 65% Floor Usage | Specialized Deep-Reach Forklifts | Bulk Raw Materials, High-Volume Homogeneous Stock |
| Radio Shuttle Racking | LIFO / FIFO Semi-Automated | 70% - 85% Floor Usage | Standard Forklifts + Automated Shuttle | Cold Storage (-25°C), Deep Freeze Logistics |
| Drive-In Racking | LIFO Block Storage | 65% - 75% Floor Usage | Standard Counterbalanced Forklifts | Seasonal Beverage Storage, Packaging Materials |
Switzerland presents distinct seismic and structural demands that international racking exporters must explicitly address. Under the Swiss Society of Engineers and Architects standard SIA 261 (Actions on Structures), Canton Zurich falls primarily into Seismic Zone Z1 / Z2, requiring rigorous lateral load calculations for freestanding high-bay industrial steel structures. Industrial racking units exceeding 3 meters in height must be evaluated for ground acceleration effects, dynamic inertia, and concrete floor anchorage shear capacities.
Our engineering exporters integrate Finite Element Analysis (FEA) modeling for all racking projects supplied to Zurich. Seismic bracing systems—comprising X-braced vertical planes, horizontal roof ties, and heavy-duty seismic baseplates anchored with chemical resin studs into concrete slabs (minimum C20/25 grade)—ensure structural resilience during seismic events without catastrophic collapse.
Engineered baseplates, heavy-duty floor anchors, and dynamic sway bracing calculated for Zurich seismic zones Z1 to Z3b per Swiss structural codes.
Fully compliant with European operational standards for safety inspection, load signage, risk classification (Green, Amber, Red limits), and rack maintenance protocols.
Precision manufacturing guarantees structural straightness and tight tolerance compliance for reach truck operating aisles and automated VNA installations.
Industrial land in Canton Zurich commands some of the highest real estate valuations in Europe. Logistics operators cannot afford wasted floor space or operational downtime. Below are key deployment scenarios where our single deep pallet racking systems deliver tangible performance gains.
Strict hygiene standards in biomedical and pharmaceutical logistics require cleanroom-compatible storage. Our single deep racking features non-gassing, epoxy-polyester powder coatings (ISO 9227 salt spray tested > 500 hours) with wire mesh decking to ensure zero dust accumulation and unhindered sprinkler water penetration under EN 12845 fire protection standards.
Temperature-controlled perishables and biological cargo stored in cold rooms (-25°C to +4°C) around Kloten demand structural steel that resists low-temperature embrittlement. We supply low-temp impact resistant steel grades combined with hot-dip galvanized surface finishes (EN ISO 1461) to guarantee long-term rust prevention in high-humidity zones.
High-velocity omni-channel fulfillment centers benefit from single deep racking integrated with pick-tunnel mezzanine levels. 100% SKU access allows high-frequency manual picking at ground levels while pallet reserve stock is stored overhead, maximizing vertical space utilization up to 12 meters.
As Canton Zurich accelerates its industrial transformation, three macro trends are shaping warehouse design and procurement strategies for pallet storage systems:
By partnering directly with an established OEM/ODM manufacturing factory and exporter, Swiss logistics companies, system integrators, and racking distributors unlock significant competitive advantages:
Technical and commercial guidance for warehouse managers, structural engineers, and logistics buyers in Switzerland.
Our single deep pallet racking systems are engineered in strict compliance with EN 15512:2020 for structural design, EN 15620 for operational tolerances and clearance limits, and EN 15635 for rack maintenance and inspection routines. Where required, structural calculations incorporate Swiss SIA 261 building code requirements for seismic actions and dynamic load resistance.
Canton Zurich lies predominantly within Swiss Seismic Zone Z1 and Z2. Our structural engineers calculate ground acceleration parameters ($a_g$), subsoil class factors, and dynamic rack inertia. We provide heavy-duty baseplates with dual concrete anchor stud fixings and specialized diagonal bracing frames to meet cantonal building safety approvals.
Yes. Single deep racking is ideal for Very Narrow Aisle (VNA) configurations with aisle widths down to 1.6-1.9 meters. We provide mechanical floor guidance rails, magnetic inductive wire-guidance adapters, and ultra-flat floor tolerances engineered to EN 15620 Class 300 / 100 specifications.
We provide full engineering documentation, CAD floor layouts, load capacity signage, structural static calculation reports, and assembly instructions in German, French, Italian, and English to facilitate seamless coordination with Swiss local authorities and site installation teams.
Standard manufacturing lead time is 2 to 3 weeks upon drawing approval. Transit to European ports (Rotterdam / Hamburg / Antwerp) and rail transport to Rhine-Ruhr / Zurich terminal typically takes 3 to 4 weeks. Expedited production schedules are available for urgent warehouse commissioning.
Yes. Beyond standard EUR-pallets (EPAL 1: 800x1200mm and EPAL 2: 1200x1000mm), we manufacture custom beam spans, heavy-duty shelf support bars, mesh decks, and drum/coil cradles designed to support non-standard industrial loads up to 4,500kg per beam pair.
Contact our technical sales team for free CAD warehouse layout design, static calculation reports, and direct factory export pricing tailored to Swiss standards.
Send an Inquiry